Izdelki za kupé b w 702 (20)

Readymesh MM-150 Fibres, obtained by the cutting of steel wire, with improved adhesion profile, for three-dimensional general structural reinforcement of cement-based conglomerates. The addition of Readymesh MM-150 significantly increases the mechanical performance of the structure in terms of toughness, ductility, fatigue, dynamic stress, shock, wear, tensile and shear strength and even post-cracking and damage behaviour. Readymesh MM-150 are particularly recommended for increasing ductility, toughness and thermal conductivity in concrete coatings for floor heating systems. General preparation of screeds, cements and fibre-reinforced concrete. Particularly recommended for compact prefabrications, thin concrete floorings and radiant floor heating systems. "Readymesh MM-150 fibres must be added to the concrete during mixing. It is recommended to pour the fibres directly onto the loading belt of the concrete mixer during the loading of the aggregates. Alternatively, it is possible to add them directly into the mixer after loading the concrete or into the onsite mixer. In this case, extend the mixing time by at least one minute (after a minimum of 3 minutes) for every m³ of packaged concrete in order to achieve optimal distribution. If using a 200-litre onsite mixer, add the fibres immediately after loading part of the aggregates and before adding the remaining parts. The typical dosage of Readymesh MM-150 fibres varies from 15 to 30kg/m³. Conglomerates with Readymesh MM-150 can be easily transported and used with pumps, joiners, vibratory finishing machines, roadway extruders (e.g. slipform paver), etc. These fibres are typically used in conglomerates that have an aggregate diameter not exceeding 10-15mm." Variable according to the type of work to be carried out and/or performance to be achieved. Bag 20 kg - Pallet: 50 x (Bag 20 kg)

Shisha charcoal incense charcoal hookah charcoal Dutch charcoal are one of the best pure smoking charcoal With high quality and standard.

Anwendung: Verfugen von Geraden, Schamottefliesen in Kachelöfen, Kaminen, Öfen, Gartengrills. Die empfohlene Fugenstärke beträgt 2-3 mm. thermischer Widerstand:1300 °C Verpackung:5 kg Gewicht (kg]:25.0000 Artikelnummer:9005249005862

Raumehl zur Anwendung für Bautenschutzmatten, Ladungssicherung, Trittschalldämmung, etc.

MFI 30-35 g/10 min.(300 °C/1,2kg, ISO 1133), DENSITY 1.12, 25 kg sack, A quality recycled material from Turkiye

Forma: Gránulo; Composición: 20%, 30% o Personalizado PEEK Relleno de Cerámica; Característica: Excelente Estabilidad Dimensional; Aplicación: Extrusión y Moldeo por Inyección.

OLIK HM 22 - 1000L OLIK HM 22 - 208L OLIK HM 22 - 20L Gamme:OLIK Secteur:HYDRAULIQUE Code EAN/CTIN:3701344705756

It is a conglomerate of marble and cement aggregates, bagged in a dry state so that the user, by mixing it with the indicated water, can obtain a mass concrete, reinforced or pre-contracted, of adequate and constant quality. Compressive strength:>25 N/mm2 Minimum cement content:275 Kg/mm2 Consistency of fresh concrete - settlement:60-90 mm Maximum size of aggregates:12 mm

Tissu 100% LIN arm ure toile 1/1, 270g/m2, 150cm Principales utilisations mode Principales utilisations:mode

PP Mfi 1-3 Regranulat PP Mfi 5-8 Regranulat PP Mfi 10-15 Regranulat PP Mfi 20-25 Regranulat PP Mfi 30-40 Regranulat PP Mfi 40-50 Regranualt PP Mfi 50-60 Regranulat

MFI rate: 0,2 - 0,6

Hartstoff gem. DIN 1100 (Gruppe A) zur Herstellung von zementgebundenen Hartstoffestrichen gem. DIN 18560-7 und DIN EN 13813. KORODUR WH-Spezial ist besonders stoßfest. Obwohl der Hartstoffgruppe A zugeordnet, werden die Schleifverschleißwerte der Gruppe M mit 3 cm³/50 cm² erreicht. Hartstoffgruppe A gem. DIN 1100:Schleifverschleiß ≤ 5 cm³/50 cm² gem. DIN EN 13813 Lieferform:25 kg Papierspezialverpackung

Readymesh MM-150 Fibres, obtained by the cutting of steel wire, with improved adhesion profile, for three-dimensional general structural reinforcement of cement-based conglomerates. The addition of Readymesh MM-150 significantly increases the mechanical performance of the structure in terms of toughness, ductility, fatigue, dynamic stress, shock, wear, tensile and shear strength and even post-cracking and damage behaviour. Readymesh MM-150 are particularly recommended for increasing ductility, toughness and thermal conductivity in concrete coatings for floor heating systems. General preparation of screeds, cements and fibre-reinforced concrete. Particularly recommended for compact prefabrications, thin concrete floorings and radiant floor heating systems. "Readymesh MM-150 fibres must be added to the concrete during mixing. It is recommended to pour the fibres directly onto the loading belt of the concrete mixer during the loading of the aggregates. Alternatively, it is possible to add them directly into the mixer after loading the concrete or into the onsite mixer. In this case, extend the mixing time by at least one minute (after a minimum of 3 minutes) for every m³ of packaged concrete in order to achieve optimal distribution. If using a 200-litre onsite mixer, add the fibres immediately after loading part of the aggregates and before adding the remaining parts. The typical dosage of Readymesh MM-150 fibres varies from 15 to 30kg/m³. Conglomerates with Readymesh MM-150 can be easily transported and used with pumps, joiners, vibratory finishing machines, roadway extruders (e.g. slipform paver), etc. These fibres are typically used in conglomerates that have an aggregate diameter not exceeding 10-15mm." Variable according to the type of work to be carried out and/or performance to be achieved. Packaging: 20 kg bag UM: €/kg

Anwendung: Verfugen von Geraden, Schamottefliesen in Kachelöfen, Kaminen, Öfen, Gartengrills. Die empfohlene Fugenstärke beträgt 2-3 mm thermischer Widerstand:1300 °C Verpackung:5 kg Gewicht (kg]:1,0000 Artikelnummer:9005249006425

Forma: Gránulo; Composición: PEEK Reforzado con Carbono 20%, 30%, hasta un 50%; Característica: Baja Viscosidad; Aplicación: Moldeo por Inyección.

Tissu 50% COTON 50% POLYESTER chaine & tram e Retors, arm ure toile 1/1, 480g/m 2, 120cm, traite 2i (imperimpu) Principales utilisations:Sacs, pochettes, cabas, bagagerie, entoilages stores imper

Tissu 50% COTON 50% POLYESTER chaine & tram e Retors, arm ure toile 1/1, 350g/m2, 156=>150cm, ecru Tombe de M etier Principales utilisations:cabas, bagagerie, tauds & voiles de vieux greem ents, baches, entoilages

PP/EPDM TV 10 Regranulat PP/EPDM TV 15 Regranulat PP/EPDM TV 20 Regranulat PP/EPDM TV 25 Regranulat PP/EPDM TV 30 Regranulat

Forma: Grânulo; Composição: 20%, 30%, até 50% de PEEK Reforçado com Carbono; Característica: Baixa Viscosidade; Aplicação: Moldagem por Injeção.

Forma: Gránulo; Composición: PEEK Reforzado con Carbono Personalizado; Característica: Alta Resistencia Mecánica; Aplicación: Moldeo por Inyección.